Videos Hide Videos Show Videos
Do you want more photos? We are happy to provide them. Just let us know what you need.
Time Shadows Subharmonic Multi-Delay Resonator
This joint collaboration between EarthQuaker Devices and Death By Audio is a major update to the original Time Shadows that was released in 2020 and limited to 1000 units! Time Shadows now features 3 modes, user assignable expression control and 6 preset slots to save and recall your favorite settings. The EQD Mode is an envelope controlled sub-octave filter delay, the ALL NEW !¡ Mode is a dual delay where each repeat simultaneously shifts up and down with each regeneration, and the DBA Mode is a multi-delay regenerating filter. All three sounds are wildly different from each other and yet share a perfectly designed harmony to be completely complementary and suitable for every style and genre of music.
Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs |
Current Draw: 75 mA |
Input Impedance: 500 kΩ |
Output Impedance: 100 Ω |
TRS expression pedal wiring: |
Tip: Wiper |
Ring: +3.3V |
Sleeve: Ground |
Flexi-Switch® Technology: This device features Flexi-Switch® Technology! This relay-based, true bypass |
switching style allows you to simultaneously use momentary and latching style switching. |
• For standard latching operation, tap the footswitch once to activate the effect |
and then tap again to bypass. |
• For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed. |
Since the switching is relay-based, it requires power to pass signal. |
Power: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES! |